[email protected]

ANSI B16.5 Forged Flanges - Texas Flange

Blind Flange (Click any image above to enlarge it and lock it in place, then scroll to the bottom table for dimensions) ANSI B16.5 Forged 1/2" - 24" Flange Classes ANSI/ASME B16.5 Class 600 Forged Flanges - Buford, GA ANSI/ASME B16.5 Class 600 Forged FlangesAdd Flanges. ANSI/ASME B16.5 Class 600 Forged Flanges. * WN Bore ID (WB):To be specified by purchaser. Nominal Size.

ASME B16.5 Flange, ANSI B16.5 Class 150, Class 300 Flange

Marcel Piping is well known ASME B16.5 Flange Manufacturers in India, ANSI B16.5 standard covers Pipe Flanges and Flanged Fittings for size NPS ½ to 24 for above NPS 26 to 60 it should be as per ASME B16.47.Each specification further delineates flanges into pressure classes:150, 300, 400, 600, 900, 1500 and 2500 for B16.5 ASTM A105 Flange SA105N Blind Flange A105 Class 300 ASTM A105 10 Inch WN Flange, Class 150 LB, SCH 40. 150# 36 Inch Slip On Flange, ASTM A105 Flange, BS 3293, Raised Face. ASTM A105 Slip on Flange, DN100, PN40, EN1092-1 . 300LB ASTM A105N Orifice Welding Neck Flange, SCH STD . ANSI B16.5, 8 Inch, Weld Neck RF ASTM A105 Flange, 600 LB, SCH 80. ASTM A105 Flange and Carbon Steel Forged/ Blind Flanges A105 Flange material is a forged carbon steel.ASTM A105 Flange Manufacturer in India produce different types and grades of the ASTM A105 Weld Neck Flange for sale. These are widely used in the market for non-critical applications. The ASTM A105 Blind Flange Material by default is not normalization heat treated. A105 Normalized Flanges are called the Ansi A105n Flanges where the n stands for

ASTM A105 PLATE FLANGE 30INCH 150LB ASME B16.47B

Flanges. ASTM A105 PLATE FLANGE 30INCH 150LB ASME B16.47B; ASTM B564 UNS NO4400 Blind flange; ASME SB564 UNS N08825 ALLOY825 LWN flanges; ASTM B564 N08031 SO RF flange; N08031 Alloy 31 Orifice Flange; N08031 Alloy 31 SORF flange; Nickel Alloy Steel ASTM B564 UNS N08020 Girth Flange; ASTM B564 UNS N10276 N10675 N10665 Threaded Flange; Stainless ASTM A350 LF2 Flanges, Low Temperature Carbon Steel Pipe Marcel Piping is well known suppliers, manufacturers and exporters of ASTM A350 LF2 LTCS Flanges, made by Low-Temperature Carbon Steel especially to ASTM A350 specifications, accomplished to work at low-temperature utility.Our LTCS A350 LF2 Slip On Flanges have a yield strength of 36ksi and are normalised to gain a good grain structure and used for hydrocarbon, steam and general industrial Carbon Steel Flanges, ASTM A105 Slip on Flanges, Carbon We are renowned & most acclaimed Source, Stock, Distribution, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM A105 Flanges in Carbon Steel. For More Information About ASTM A105 Carbon Steel Flange Please Call +91 22 2386 6335 or Send an Email to [email protected]

SO RF Flange A694 F46 DN150 PN40 Galvanized - Derbo

Products Related to SO RF Flange A694 F46 DN150 PN40 Galvanized ASTM A105 WN RF Flange ASME B16.5 Forged 20 Inch 300 LB ASTM A106 Gr.B Carbon Square Tube 10.3 X Slip On Flange - Introduction and Specifications OctalsteelSlip On Flange. Common outer diameters:1/2 inch to 24 inch. Special customized diameters:up to 60. Class range:Class 150 to 2500. PN 2.5 to PN 250. Octal offers slip on flange with materials standards in ASTM A105, ASTM A182, ASME B16.5, BS 3293, DIN 86029. Slip on flange also named as SO flange. SO flanges slip over pipes and are Steel (Class 150) Pipe Flanges McMaster-CarrPipe Nipples and Pipe:Use Schedule 40 galvanized steel. Fittings:Use Class 125 or 150 galvanized iron and galvanized steel. The galvanized finish on these flanges provides fair corrosion resistance. Also known as Class 150 flanges, they are for use in low-pressure applications. Bolt two same-size flanges together with a gasket (sold

ASTM A182 FLANGES ANSI B16.5 INDEX

astm a182 flanges ansi b16.5 class 150 stainless steel flanges ansi b16.5 threaded blind socket weld q f 1/16" x o.d y 1/16" o.d f q y 1/16" o.d. f b1 x b2 d nom. pipe size min. thread length radius (r) lap joint drilling bolting diameter of bolt circle no. of holes dia. of holes dia. of bolts machine bolt length stud bolt length raised face.06